Menu Close

Why did my Sony DVD player stop working?

Admin

Why did my Sony DVD player stop working?

Make sure that the disc has been inserted properly into the player. Make sure that the DVD player is connected properly to the TV . Check that the TV where the DVD player is connected to is set to the right input. Make sure the DVD region code and format of the discs are compatible with the player.

Why did my DVD player stop working?

Check if the optical disc drive is dirty or broken. Dust is always the culprit for most DVD player not read/load errors. DVD player not working might be a sign that the disc tray, tray motor or laser is worn out. To fix any of the DVD hardware, you need to open the housing and check the inside with special tools.

How do I troubleshoot my Sony DVD player?

Follow the steps below to troubleshoot this issue:

  1. Make sure the child lock feature is disabled.
  2. Try to open the disc tray.
  3. If the issue still occurs, power off your DVD player.
  4. Unplug the power cord for 30 seconds and then plug it back in.
  5. Power on your device.
  6. Try to open the disc tray.

How do I fix my Sony DVD player that won’t turn on?

The disc player will not turn on or has no power.

  1. Make sure the power cord is securely connected to the player and plugged into a working electrical outlet.
  2. Try turning on the power by pressing the POWER button on the front of the player.

How do I force a DVD player to open?

Attempt to open the disc tray. If this doesn’t work and since you do not state the model number of your DVD player, try the following: Simultaneously press the POWER + STOP + EJECT buttons. If the disc tray still does not open, simultaneously press the DISC1 + STOP + EJECT buttons.

How do I reset my Sony DVD player?

How do you reset a Sony DVD player?

  1. On the supplied remote control, press the HOME button.
  2. Select Setup.
  3. Select Resetting or icon.
  4. Select Reset to Factory Defaults Settings.
  5. Select All Settings.
  6. Select Start.
  7. Select Close.
  8. Turn off your device, then turn it back on.

How do I fix my DVD player that wont work?

How to Fix Sony or Other DVD Player Not Reading/Loading Disc?

  1. Check if the disc is placed correctly and if the disc is in good condition. Make sure the disc isn’t put in upside down and also ensure the disc isn’t out of alignment in the loading tray.
  2. Check DVD player’s loading tray, laser lens and servo alignment.

What do I do if my DVD drive wont open?

How to Open a Jammed CD/DVD Drive

  1. Step 1: The Paper Clip. Straighten out one leg of the paper clip.
  2. Step 2: The Small Hole. Find the small hole on your CD drive, it is usually near the button.
  3. Step 3: Stick the Clip Into the Hole. Stick the clip into the hole and gently push until the door opens.
  4. Step 4: Finish.

What to do if DVD is not reading?

Remove the disc from the DVD player. Use a lint-free cloth and some denatured alcohol or water to clean the disc and remove any dust or smudges that may prevent the player from reading it properly. Reinsert the disc into the player and press “Play” to see if cleaning the disc fixes the “NO DISC” error.

What do you do if your DVD player wont turn on?

Check to make sure that the unit is plugged in securely to the power source (outlet, or power strip). Press the Power on/ standby button on the front of the unit to turn the unit on. Reset the unit by unplugging it for one (1) minute. Then plug it back in to the power source and power the unit on.

What do you do when your DVD player wont play?

How to Fix DVD Won’t Play – 7 Solutions

  1. Solution 1: Check if the DVD type is incompatible with DVD player.
  2. Solution 2: Clean the dirty DVD or try a different disc.
  3. Solution 3: Ensure solid connection between DVD player and TV.
  4. Solution 4: Install Third Party DVD Player Software.
  5. Solution 5: Update DVD Firmware.

How do you fix a DVD player when the drawer won’t open?

How to Fix a DVD Player When the Drawer Won’t Open

  1. Turn off your DVD player.
  2. Locate your DVD player’s manual Eject button.
  3. Insert a stiff wire-such as a paperclip or safety pin-into the hole.
  4. Remove the DVD and see if there is a problem with it.
  5. Turn your DVD player back on.

Why is my DVD player not showing a picture?

pressing the PROGRESSIVE button on the front of the DVD player or P.SCAN button on the remote control to disable the progressive signal. power off the DVD player and press 369 using the number buttons on the remote control, then power back on the DVD player. moving the VIDEO OUT switch on the back of the DVD player to the INTERLACED position.

What should I do if my DVD player won’t open?

Follow the steps below to troubleshoot this issue: 1 Make sure the child lock feature is disabled. 2 Try to open the disc tray. 3 If the issue still occurs, power off your DVD player. 4 Unplug the power cord for 30 seconds and then plug it back in. 5 Power on your device. 6 Try to open the disc tray. See More….

How do you turn off a DVD player?

power off the DVD player and press 369 using the number buttons on the remote control, then power back on the DVD player. moving the VIDEO OUT switch on the back of the DVD player to the INTERLACED position. pressing and holding the PAUSE button on the front of the DVD player for 5 seconds.

What to do when your Blu ray player won’t play?

On your device, press and hold the Power button for ten seconds or more to turn it off. Turn on the device. Press the Eject button and remove the disc. On the supplied remote, press the HOME button. Select Setup. Select Screen Settings. Select BD-ROM 24P Output. Select Off. Get Support Content on the Go!