Menu Close

What size drive belt does a John Deere LT155 take?

What size drive belt does a John Deere LT155 take?

1/2″ X 86.4″ Fits LT155.

What year is a John Deere LT155?

John Deere LT155

Production
Manufacturer John Deere
Factory Horicon, Wisconsin, USA
Original price $2,499 (1997 38 )
Original price $2,699 (1997 42 )

What size deck does a John Deere LT155 have?

38″
John Deere LT155 Dimensions

John Deere LT155 Weight
470 lbs (with 38″ deck) 213 kg
475 lbs (with 42″ deck) 215 kg
Shipping 388 lbs 175 kg

Do you have to remove mower deck to replace belt?

To replace this belt, the deck should be off the lawn mower. To remove the front of the belt from the engine pulley, you may have to remove the cap screw from the center of the pulley and PTO to the engine crankshaft.

How do you adjust a John Deere drive belt?

Loosen the center bolt on the transmission drive belt idler arm, but do not remove it. Holding the top of the center bolt-head with the combination wrench while loosening the retaining nut on the underside with a socket wrench is the next task. Push the idler arm forward to align the adjustment bolt holes.

How long should a mower drive belt last?

Considering you are mowing 2 to 3 times the lawn of the typical homeowner, or 6 to 9 years worth, yeah, it could be worn. Also consider the possible need for drive cable adjustment or engine rpm adjustment.

How often should I change the oil in my John Deere riding mower?

John Deere recommends you check your oil level before each use and to change your oil once a season. That’s about every 50 hours of lawn tractor use.

What motor is in John Deere LT155?

Kohler CV15S
John Deere LT155 Engine

Engine Detail
Kohler CV15S
air-cooled vertical-shaft
Displacement 426 cc 26 ci
Bore/Stroke 3.55×2.64 inches 90 x 67 mm