Table of Contents
What is the purpose of having a safety lanyard on a personal watercraft?
Wearing a lanyard connected to a Safety Ignition Switch on a PWC reduces the risk of propeller strike and other injuries. Most powerboats and PWCs have a safety switch. This switch shuts off the engine if the operator falls off the PWC or out of the powerboat.
When operating a personal watercraft Where should the lanyard be attached?
Most models have an automatic cut-off lanyard (which must be attached to the operator’s wrist or life jacket at all times) or self-circling feature to prevent a PWC from going far from a driver who has fallen off.
What does an engine cut off lanyard help reduce the risk of?
propeller injury
Wearing the lanyard reduces the risk of a propeller injury.
What does a compliance notice show?
The compliance notice states that the vessel complies with the construction requirements when it was built or imported (whichever date was most recent). The notice also shows the maximum number of people that can safely board the vessel. This is also known as a “capacity label.”
What must PWC operators do with the safety lanyard?
An operator of a PWC equipped with a lanyard-type engine cut-off switch (ECOS) must attach the lanyard to his or her person, clothing, or life jacket. PWC must be muffled effectively and also must display the required navigation lights if operated between sunset and sunrise.
Where is the safety lanyard on a PWC?
In order to start a PWC, one will need to use the lanyard attached to the start/stop switch. The lanyard must be attached to both the switch and wrist or lifejacket. These fast vessels make sharp turns and accelerate quickly. So operators often fall from them.
What is the important safety information found on a boat’s capacity plate?
Look for a capacity plate near the operator’s position or on the transom of the boat. This plate indicates the maximum weight capacity and/or the maximum number of people that the boat can carry safely in good weather.
When to remove lanyard from personal watercraft?
Remove the lanyard whenever the craft is unattended to prevent unauthorized use. Driver and passengers should always wear a Coast Guard-approved life jacket. Eyewear will block the force of wind and water spray that could impair vision. Gloves and footwear offer welcome additional grip and traction.
What is the purpose of the ignition safety switch lanyard?
What is the purpose of the ignition safety switch lanyard, also called a kill switch on a PWC or a powerboat? To keep a throwable PFD from
What does an automatic cut-off lanyard do when properly attached to a PWC operator?
What does an automatic cut-off lanyard do when properly attached to a PWC operator? It stops the engine when the operator falls overboard. What must be visible to law enforcement personnel while operating a PWC?
When does an automatic cut off lanyard do?
Half-hour before sunrise to half-hour after sunset What does an automatic cut-off lanyard do when properly attached to a PWC operator? It stops the engine when the operator falls overboard. What must be visible to law enforcement personnel while operating a PWC?