Table of Contents
What is the ideal level of pH in a swimming pool?
between 7 and 7.6
pH level in swimming pool water Aim for a pH level of between 7 and 7.6.
Is 7.2 pH good for a pool?
A swimming pool pH should be slightly alkaline, between 7.2 to 8.0. pH above 8.0 can cause skin irritation and at higher pH’s scaling can occur upon your pool’s surface. If Your pH is Too Low: A pH below 7.0 is considered to be too low.
How do I fix the pH balance in my pool?
The basics include:
- Always take proper precautions and wear proper Personal Protective Equipment when balancing pH.
- Add soda ash if your pool’s pH level is below 7.2. Add Muriatic Acid or Sodium Bisulfate if it’s above 7.8.
- Continue to add appropriate product until your water has a pH level of 7.2-7.8 (ideally 7.4-7.6).
Is it better to have high or low pH in pool?
Proper pool pH is right in the middle — pool pros recommend that pH be between 7.3 and 7.6 for optimum performance and cleanest water. If the pH gets higher than 7.8, the water is becoming too alkaline. Water with a pH that’s too high also can cause skin rashes, cloudy water and scaling on pool equipment.
Is it safe to swim in pool with low pH?
Low pH is bad for swimmers, your pool and your wallet. Acidic water is corrosive. Low pH water will cause etching and deterioration of plaster, grout, stone, concrete and tiling. Any vinyl surfaces will also become brittle, which increases risk of cracks and tears.
What raises pool pH?
The two primary chemicals to increase pH are sodium carbonate, aka soda ash (Na2CO3), and sodium bicarbonate (NaHCO3). Both raise the alkalinity, but soda ash has a stronger impact on raising the pH.
What is the ideal pH level for a pool?
Maintaining swimming pool pH is critical, and is part of an overall measuring scheme to gauge how well swimming pool water is balanced. The ideal swimming pool pH range is 7.4 to 7.6, with 7.5 being an ideal target pH value. Pool owners need to watch the pH level carefully, as too low or too high pH can cause significant damage to swimming pools.
What causes low pH in pool?
Pool pH is Always Low. The most common cause of consistently low pH level in pools is using chlorine tablets, or stabilized forms of chlorine, which have a pH level of around 3. Acidic rainfall and heavy leaf debris, and dirt/mulch can also lower pool pH level.
What makes pool pH high?
Some of the causes of PH being high would be if you have a saltwater pool, it’s constantly making sodium hypochlorite which is already high in PH. Another reason might be a new pool surface.
What chemical raises pH in pool?
Sodium carbonate (soda ash) is the most common chemical used to raise pH and total alkalinity in pools. It takes about 6 ounces for every .2 pH points you need to raise 10,000 gallons of water.