Menu Close

What are five types of wrenches?

What are five types of wrenches?

  • Adjustable Wrench. Tightens/loosens nuts and bolts.
  • Combination Wrench. Tightens/loosens nuts and bolts.
  • Open-End Wrench. Tightens/loosens nuts and bolts.
  • Ratchet Wrench. Tightens/loosens nuts and bolts.
  • Short-Body or Stubby Wrench. Tightens/loosens nuts and bolts in tight spaces.
  • Crowfoot Wrench.
  • Basin Wrench.
  • Pipe Wrench.

What are the most common wrenches?

Most common are the 1/4-inch, 3/8-inch and ½-inch ratchet drivers, but ¾-inch and 1-inch sets are available for heavy-duty work.

What are the names of some common wrenches?

Types of Wrenches

  • Pipe wrench.
  • Chain wrench.
  • Socket wrench.
  • Torque wrench.
  • Ratcheting Wrench.
  • Oil Filter Wrench.
  • Combination wrench.
  • Adjustable wrench.

What is the most common style wrench used?

Adjustable Wrench – The adjustable wrench is one of the most common types of wrenches in household use. Also called a crescent wrench, it has a single open end with a crescent-shaped jaw that opens or closed with the turn of a spiral screw in the head.

What is a 6 sided wrench called?

WRENCH TYPE: Hex-Key Wrench Also called Allen wrenches (although “Allen” actually refers to specific brand known for making hex-key wrenches), these short six-sided bars of steel are characteristically L-shaped, with one side shorter than the other.

What’s the difference between pliers and wrenches?

Wrenches are designed to fit nuts, bolts and other standard fasteners. Pliers grip, turn, squeeze and rotate round or irregularly shaped objects of most any size, from baling wire to barbecue grills.

What is smaller than a 7/16 wrench?

Metric / Standard Wrench Conversion Chart

Bolt Diameter Metric Standard
1/4″ 11mm 7/16″
5/16″ 13mm 1/2″
3/8″ 14mm 9/16″
7/16″ 16mm 5/8″

What are the two types of wrenches?

The wrenches come in two common forms: L-shaped and T-handles. The L-shaped wrenches are formed from hexagonal wire stock, while the T-handles are the same hex wire stock with a metal or plastic handle attached to the end.

Who uses a wrench?

Wrenches are made in various shapes and sizes and are used for gripping, fastening, turning, tightening and loosening things like pipes, pipe fittings, nuts and bolts. There are basically two major kinds of wrenches: Pipe wrenches used in plumbing for gripping round (cylindrical) things.

Should you normally pull on a wrench?

Always pull, rather than push, a wrench for greater control and balance. That way, if the nut or bolt should suddenly loosen, you’re less likely to go flying. Never try to get more torque from a wrench by using a cheater bar or other device to extend the leverage.

Should I use a wrench or pliers?

Wrenches are almost always a better tool than pliers for loosening and tightening nuts and bolts because they provide greater torque than pliers and are less likely to round or damage fasteners.

Who uses pliers and wrenches?

Plumbers will often use tongue-and-groove pliers for just about everything. But a good rule of thumb is that for any fitting with a nut on it or a hex head, use a wrench. If you’re going to use pliers on a hex-shaped fitting, bolt, or nut, at least use a pair that has a V-notch in the jaws to accommodate the hex shape.

What types of wrench ends are there?

Open-End Wrench. An open-end wrench is a fixed size tool with a U-shaped opening on one or both ends.

  • but its ends are closed.
  • Combination Wrench.
  • Adjustable Wrench.
  • Monkey Wrench.
  • Pipe Wrench.
  • Allen Wrench.
  • Socket Wrench.
  • Ratcheting Wrench.
  • Crowfoot Wrench.
  • What is the use of allen wrench?

    In addition to assembling furniture, the Allen wrench is also commonly used for bike repairs. The unusual shape, plus the fact that the Allen wrench is small and light and capable of getting into hard-to-reach places on a bike, makes it particularly useful for cyclists to carry with them as they ride.

    What is the ratchet wrench?

    Ratchet Wrench Tightens/loosens nuts and bolts Metric and standard sizes Ratchet action on one end moves freely in one direction and engages the fastener in the other direction to tighten or loosen nuts and bolts without removing the tool Some have pivoting ratchet ends for use in tight spaces

    What is a wrench and socket?

    A socket wrench is the lever that turns a socket. Sockets are various sized fitting that allow the force applied to the lever to be transmitted to a nut or bolt. On your wrench is a cube looking attachment. This piece fits into the back end of a socket.