Table of Contents
- 1 When entering an expressway in the acceleration lane you should?
- 2 When exiting an expressway you should begin to reduce speed?
- 3 Which is the best procedure to use when entering an expressway?
- 4 How much in advance should you try to be in the correct lane to exit the highway?
- 5 Whats the first thing a driver should do after deciding to make a turn?
- 6 When to signal your intention to exit an expressway?
When entering an expressway in the acceleration lane you should?
When entering the freeway using the acceleration lane or on-ramp, you’ll want to accelerate to the speed of traffic on the freeway. Use the length of the acceleration lane to get up to speed, put your turn signal on to indicate that you are merging, wait for a large enough gap in traffic, and merge when safe to do so.
When exiting an expressway you should begin to reduce speed?
Answer: When exiting the freeway, the off-ramps provide more than adequate space for a driver to slow down to surface street speeds. A driver should signal his intention to exit the freeway (at least 100 feet before the movement), move onto the exit ramp and then begin to slow for the transition to slower speeds.
When exiting an expressway you need to slow down before moving to the deceleration lane?
Avoid slowing down on the freeway itself. Wait until you are in the deceleration lane. Then slow gradually until your speed matches the posted exit ramp speed. If you miss the exit ramp, never turn around or back up.
What do you usually do in an acceleration lane?
Acceleration/deceleration lanes encourage smooth increases in traffic flow, while also increasing speed and volume on freeways and major streets by allowing traffic to adjust to the proper speed in a designated area before merging into or out of the main traffic lanes.
Which is the best procedure to use when entering an expressway?
How do I enter a freeway?
- Look for the freeway entrance sign.
- Make sure that you are not entering the freeway exit ramp.
- Follow the freeway entrance’s speed limit.
- Follow the freeway entrance’s ramp meters signal lights.
- Accelerate to a safe speed close to the flow of freeway traffic.
- Merge into the freeway lane.
How much in advance should you try to be in the correct lane to exit the highway?
you should: Try to look ahead at least 12 seconds to make sure you are alert to changing traffic and road conditions such as roadwork, congestion, heavy traffic, slow traffic, or stop and go traffic. Always signal at least five seconds before changing lanes.
When getting ready to exit the expressway you should?
When exiting an expressway, it is important to be alert to other traffic moving nearby. Be sure to look at the new posted speed limit and check your speedometer. It is unlikely that you will be exiting onto a road with a speed limit as high as the one found on the expressway.
What is the appropriate time for a driver to slow down when leaving a freeway?
When you exit a highway, avoid slowing down on the freeway itself. Wait until you are in the deceleration lane and slow until your speed matches the posted exit ramp speed.
Whats the first thing a driver should do after deciding to make a turn?
First you will need to stop at the stop line, make sure that you do not interfere with pedestrians, bicyclists, or vehicles moving on their green light, and make a turn. If a street has a left turn lane, you must use it when you turn left.
When to signal your intention to exit an expressway?
If you are traveling in a passing lane and are being tailgated or if a driver flashes their high beams at you, signal and __________ as soon as it is safe to do so. When exiting the expressway, signal your intention to exit approximately _____mile before you exit.
How to take the Drivers Ed module 7 test?
When entering an expressway, if you get on the wrong ramp and are heading to the wrong destination, ___________onto the expressway and leave at the next exit. When approaching a tollbooth, look for signs and signals that indicate which lane you need to be in – a green light indicates which lanes are __________.
What is the proper way to enter an expressway from the entrance ramp?
What is the proper way to enter an expressway from the entrance ramp? A.) go down the ramp and cross over to the traffic lane as soon as possible. B.) use the acceleration lane to blend into the traffic. C.) go down to the bottom of the ramp and stop until it is safe to enter the expressway.