Table of Contents
What size is s10 drain plug?
17mm
Dorman – Autograde – Oil Drain Plug Standard M14-1.50, Head Size 17mm (Part No. 090-075CD)
What size is the oil drain plug on a 2000?
Dorman – Autograde – Oil Drain Plug Standard M14-1.50, Head Size 17mm (Part No. 090-033.1)
What type of wrench should be used to remove an oil drain plug?
A 13mm or a 15mm wrench is required when it comes to removing the most common drain plugs. These two sizes are the most commonly used lengths in car maintenance in general as well.
How much oil does a Chevy s10 2.2 take?
4.5 quarts
Engine Oil
| Viscosity: | 10W-30 (Above -18) 5W-30 (All TEMPS) SAE 5W-30 is preferred. |
|---|---|
| Capacity: | 4.5 quarts (with filter)After refill check oil level. |
| Torque: | 33 ft/lbs (Oil Drain Plug) |
Where is the oil filter on a 4.3 Vortec?
The 4.3 liter Vortec V6 engine holds four and one-half qts. of engine oil inside the oil pan. The oil pan is located on the bottom of the engine and the oil filter is located on the driver’s side of the engine right next to the oil pan. The oil filter will need to be changed as well during this process.
What size is the oil pan bolt on a Honda Civic?
The honda civic oil pan drain plug has a m14 x 1.50 Bolt with a 17mm head.
Where is the dipstick on a 2001 Chevy s10?
The oil dipstick in a chevy s10 is located in the oil reservoir.
What oil does a Chevy s10 take?
The four-wheel-drive S-10 requires 5W-30 motor oil.
What happens if you over tighten oil drain plug?
Unfortunately, you can do damage by overtightening, too. If you over-tighten the drain plug, you can strip the threads. And while it’s harder to do, you can damage the rubber gasket atop the oil filter if you really overtighten it.
How much should you torque oil drain plug?
20 to 25 foot-pounds is the Torque specification for oil drain plugs.
What kind of oil should I put in my 2000 Chevy s10?
SAE 5W-30
Engine Oil SAE 5W-30 is preferred.
What kind of socket wrench do you need for an oil drain plug?
Before embarking on a project, for instance replacing your car’s engine oil, you need to decide which size socket wrench to use. You need a socket wrench to open the oil drain plug so the used oil can drain from the engine.
How big is an Acura oil drain plug?
Oil Drain Plug Size Chart Oil drain plug size Acura Oil Drain Plug Sizes Acura 4 Cylinder Engines. 2013-10 ALL m14x1.5 2013-86 2.4L/2.3L m14x1.5. Acura 5 Cylinder Engines. 1998-92 m14x1.5. Acura 6 Cylinder Engines. 2006-86 Legend & NSX, RSX m14x1.5 2013-97 All Others m14x1.5
How big is a Ricks oil drain plug?
2013-05 2.0L . diesel except BWT. BWA, CCTO engines m14x1.5 2005-04 2.7L m14x1.5 1993-89 1.8L Impulse Stylus m14x1.5 1992-88 2.5L m85 x 2.50 . 1987 2.5L Calais MT m85 x 2.50. Alldatadiy.com and Eautorepair.net are professional-grade shop manuals—period. They include wiring diagrams and technical service bulletins.
How big of a socket wrench do I Need?
For each particular job, it’s important to choose the size socket wrench that corresponds with the particular hardware. There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters).