What RPM are you supposed to idle at?

What RPM are you supposed to idle at?

about 600-800 rpm
Typically, engines idle at about 600-800 rpm. Older engines may go up to 1200 rpm or more while warming up. But if the engine is revving up while idling, even after it’s sufficiently warmed up, you might have a problem. High idle speeds waste fuel, cause extra wear and tear on your engine, and can be unsafe as well.

How many RPMs should a car be at 70 mph?

Make sure your OD is on, 3000 seems fine for 70. The motor needs to work harder if you go fast.

Does timing affect idle speed?

Does timing affect idle speed? – Quora. Yes. In the case of both valve timing and distributer timing (in older cars with a spark distributer) changing the timing will affect the idle speed at the same throttle setting, because it will affect the efficiency of the engine at that throttle setting.

How do you fix high rpm in a car?

If the PCM offers no hints, the best place to begin looking for problems is with the Idle Air Control Valve/Bypass Air Control (IACV/BAC). You can try cleaning it and see if that improves your idle speed. A throttle body cleaning is likely to cure the high idle speed as well.

What causes RPM to drop at idle?

This is a common sign of a dirty or failing idle air control valve. This is all controlled by the idle air control valve. When the engine RPM drops below the normal range of 750-800 RPM (for most cars), this often times will cause the engine to stall indicating a dirty or faulty idle air control valve.

Is 1500 RPM idle bad?

This is a perfectly normal occurrence. It is simply something your car needs to do so that it can start properly. You should not be concerned if your car jumps up to 1500 RPM and then shortly afterward goes back down to a normal 800 RPM.

What does the idle speed control valve do?

The idle air control valve — also known as the “idle speed control valve” — regulates the idle speed of your engine. This is controlled by the engine’s computer. Sometimes parts go bad, which results in your car idling strangely or stalling. Check to see if your idle control valve is functioning properly before attempting to replace it.

Why is my idle control not working on my car?

If the idle has not changed at all, it’s likely because your idle control motor has not been functioning. If the idle control motor was working, disconnecting it should have created a difference in the engine’s idle. This test confirms there’s an issue with the idle control motor, but not what the issue may be.

How can I increase idle speed in a Chrysler?

If the resistance is outside that range, the idle control motor needs to be replaced. Use a bidirectional scan tool to increase idle speed in a Chrysler. Connect a bidirectional scan tool to the same OBD port you would plug a code scanner into. Use the command in the scan tool to increase the engine’s idle.

What should resistance be for idle control motor?

Connect an Ohm meter to the two and measure the resistance between them. Fords are designed to operate with the resistance in the solenoid in a range between 7.0 to 13.0 ohms. If the resistance is outside that range, the idle control motor needs to be replaced.