Menu Close

What is the PGM fuse?

What is the PGM fuse?

The MALL PGM fuse, when removed, will put the MALL (aka, the Body Control Module) into programming mode. This is used for programming keyless entry fobs.

Where is the mall PGM fuse Grand Prix?

Locate the fuse box under the dash of your Grand Prix, just inside the driver’s side of the car. Remove the cover from the fuse box and locate the “MALL PGM” fuse. It is in the top row, center and will be marked.

How do you reset the anti theft system on a Pontiac Grand Prix?

The keyless entry remote and the ignition key are required to reset the anti-theft system.

  1. Exit the vehicle and stand next to the driver’s side front door.
  2. Press and hold the lock and unlock buttons on the keyless entry remote until the horn honks once and the lights flash briefly.

How do you start a 2006 Grand Prix without the key?

Lift up on the hanger slowly until you feel the hanger connect to a metal rod inside the Grand Prix’s door frame. Once you feel it connect, then pull the door handle at the same time that you lift up on the metal rod. The door lock will release and your door will open.

How do you program a key fob for a 2005 Pontiac Grand Prix?

Press and hold the fob’s “lock” and “unlock” buttons at the same time for 14 seconds. After you’ve held it seven seconds, you will hear a chime confirming successful programming. Wait the 14 seconds for a second chime. Repeat the last step for each additional remote.

How do you program a key fob for a Pontiac Grand Prix?

Put your key into the ignition, and turn to “ACC.” Turn the key on and off within a second. Open and close the driver’s door and listen for the chime that indicates you are in programming mode. Press and hold the LOCK and UNLOCK buttons for 14 seconds, listening for the chime. Wait 14 seconds for the second chime.

Does a 2006 Pontiac Grand Prix have a chip in the key?

This key contains an embedded micro-chip called a transponder. Each transponder has its own unique code–it’s the key’s ‘fingerprint’. When the key is inserted into the ignition and turned, the transponder is energized and broadcasts its unique code to the car’s receiver in the dashboard.

How do you program a transponder key?

How to Reprogram a Transponder Key

  1. Enter your vehicle and put the key into the ignition and turn it to the “ON” position. Leave it in for 10 minutes and 30 seconds.
  2. Before 45 seconds pass, turn the key to the “OFF” position.
  3. Repeat the above step by turning the key to the “OFF” position within 45 seconds.

How do you program a Pontiac Grand Prix key fob?

Where is the fuse box on a Pontiac Grand Prix?

Cigar lighter (power outlet) fuse in the Pontiac Grand Prix is located in the Instrument panel fuse box (see fuse “CIG LTR”). It is located in the glovebox, behind the cover on the right. How to check the fuses? How to replace a blown fuse?

What to do if your Grand Prix window won’t go up?

Looking to see if your Grand Prix blew a fuse is a great place to start. This is particularly true if the window does not seem to have been struggling before it failed to go up. If all of the windows don’t work, that is going to be a fuse or window relay that has gone bad. You’ll need to locate the fuse box, and then the power window fuse.

When did the Pontiac Grand Prix come out?

In this article, we consider the sixth-generation Pontiac Grand Prix, produced from 1997 to 2003. Here you will find fuse box diagrams of Pontiac Grand Prix 1997, 1998, 1999, 2000, 2001, 2002 and 2003, get information about the location of the fuse panels inside the car, and learn about the assignment of each fuse (fuse layout) and relay.

Why is the window on my PT Cruiser not going up?

These include a blown fuse, bad window motor, wiring issues, and the switch. This short troubleshooting guide is written with you needing to get the window up right now in mind.