What is the minimum tire tread required by law?

What is the minimum tire tread required by law?

2/32 inch
U.S. law requires tires to have easy-to-see Tread Wear Indicator bars running from one side of their tread design to the other when the tire’s tread has worn down to the minimum legal limit of 2/32 inch.

What is legal tire tread depth?

While 1.5mm is the legal minimum for tyre tread depth, we recommend considering changing your tyres as soon as possible once your tyre tread depth equals 3mm.

Is 4 32nds of tread depth legal?

Driving on a tire with 4/32nds-inch tread depth is safe. That seems to be the consensus in our industry. The federal government only requires that tread wear bars be placed at the 2/32nds-inch wear mark.

What is the minimum tire depth?

1.6 mm
A new car tyre begins life with approximately 8-9mm of tread depth. Legally, you can drive on them until they reach a minimum depth of the tread of 1.6 mm, across 75% of the tyre’s width and all around its circumference.

Should I replace my tires at 5 32?

6/32″ or higher: Your tire’s tread depth is sufficient. 5/32″: If snow-covered roads are a concern, you should consider replacing your tires. 4/32″: If you frequently drive on wet roads, consider replacing your tires. 3/32″: It’s time to start shopping for new tires.

What is the minimum tread depth for front tires?

4/32-inch
You absolutely must memorize that the front tires (steer tires) need at least 4/32-inch tread depth in every major groove. All other tires (drive tires, trailer tires, etc) must have at least 2/32-inch tread depth in every major groove.

How many 32nds does a new tire have?

In the United States, tire tread depth is measured in 32nds of an inch. New tires typically come with 10/32” or 11/32” tread depths, and some truck, SUV and winter tires may have deeper tread depths than other models.

What tread depth indicates tires should be replaced soon?

Tread depth what to do 5/32” If wet roads are a concern, consider replacing your tires. 4/32” – 3/32” Seriously consider replacing your tires as soon as possible. If it’s a winter tire, 4/32” is the minimum.

What is the minimum tread depth for passenger tires?

2/32 of an inch
Most states require a minimum of 2/32 of an inch (approximately 1.6 mm) of tread, but two require less, some have no requirements, and some defer to the federal criterion for commercial vehicle safety inspections.

Is 7 32 tread good?

So, 7/32 is pretty good, but is not comparable to a new tire. As you have probably surmised, tread wear varies considerably from one model of tire to another, and the tires that come on most new cars are not noted for very good tread wear.

What is the minimum tire tread depth in Texas?

Tread depth requirements are set individually by the states. There are 6 states that have no minimum tread requirements. California and Idaho both require tires to have 1/32”. Texas will require you to have 3/32” in order for your vehicle to pass inspection and the rest of the states all require you to have 2/32”.

What is legal tire depth?

Legal Minimum Tread Depth. Most tires are sold with a tread depth of 10/32″ to 12/32″ of an inch. Many state laws require tires to have a minimum tread depth of at least 2/32″ in order to be road legal.

How do you measure tread depth?

The best way to measure your tread depth is to stick the probe into the shallowest groove on the tire, press the shoulders of the probe flat against the tread and then read the result. All gauges should measure both in the 1/32″ United States standard and in millimeters.