Table of Contents
What do the numbers on a padlock mean?
A “Direct Code” is the exact numbers related to the cuts or the depths of each valley in your key. This is typically used to identify a specific key and how the lock should be combinated to allow the key to operate. For the most part, this happens from the lock manufacturer.
What are the numbers on the back of a Master lock?
You now know all the possible first numbers (3, 7, 11, 15, 19, 23, 27, 31, 35, 39), all the possible second numbers (1, 5, 9, 13, 17, 21, 33, 37), and the third number (27). You’ve just narrowed down 64,000 combinations to only 80. Try every possible combination until you find the right one.
What is a bitting code?
The bitting code is the translated blind code which the locksmith actually uses to cut each blank key. The bitting code is used in conjunction with a key’s Depth and Spacing Number to completely determine all relevant information regarding the key’s geometry.
What is the pinhole for on a padlock?
A1: Some padlocks, especially those for outdoor use, may have a tiny hole in the side of the cylinder slot. One of its functions is to keep the padlock mechanism unaltered over time, expelling water which could stagnate due to excessive humidity or freeze inside the padlock at low temperatures.
How do you read a padlock size?
Padlocks tend to be measured by body size (width), the larger the body, the thicker the shackle, and greater the horizontal and vertical clearance will be. Above you can see the Squire Stronghold Range that goes from a 50mm body to an 80mm.
What is a key code number?
A key code is a series of characters (sometimes numbers, sometimes letters and numbers) that gives locksmiths the ability to cut a key that will work your lock. Key codes come in two types, blind codes and direct digit codes.
Where is the serial number on a Master Lock?
Photocopy the serial number on the back case of your combination lock. This copy MUST clearly show that the lock is not attached to anything. Be sure to hand write the serial number on the photocopy.
Where do I find a key number?
In most cases the key number will be stamped on the front of the lock next to where the key enters. In some cases the number may also be stamped on the original key.
What is a dimple lock?
Meanwhile, a dimple lock is a pin cylinder that makes use of the dimple key’s flat side of the blade as the bitting area. Instead of cutting into the key’s edge as is done in a standard pin cylinder, dimple locks turn the key ninety degrees out and cut onto the flat side.
What’s the padlock number on my LV keys?
My padlock number is 440, and the keys are engraved with the number 440 as well, it came in a brown box, and the lock says: I know my bag is authentic because it came from the boutique with the gift box and official receipt and material cards found in the bag.
Where do you find the combination on a padlock?
Look on the back of the lock to find the combination. Most padlocks will have the combination listed either on the back of the lock or somewhere within the packaging. Look for a three digit code when you buy your lock. 2
What does the padlock symbol on a check mean?
The symbol looks like the following: The addition of the Enhanced Check Security Features Padlock Icon is intended to provide an indication to all parties accepting checks that additional security features have been incorporated in the design of the check, the production process, or the materials being used.
Which is the correct way to open a padlock?
The first number in the code represents the number that your leftmost dial must be on to open the lock. Rotate the dials until the indicator on the side of the lock lines up with the first digit of the code. Sometimes the indicator for the numbers will be a red line or arrow. Rotate the rest of the dials to match the code.