Menu Close

How many devices can be connected to an IEEE 1394 port?

How many devices can be connected to an IEEE 1394 port?

63 devices
IEEE 1394, High Performance Serial Bus, is an electronics standard for connecting devices to your personal computer. IEEE 1394 provides a single plug-and-socket connection on which up to 63 devices can be attached with data transfer speeds up to 400 Mbps ( megabit s per second).

How many devices can be connected to each FireWire and USB connecters?

This means that the computer is always the host. The bus has a speed of 12 Mbps maximum and each device can request up to 6 megabits per second. Theoretically, up to 127 devices can be connected to a host via a hub or directly. Realistically, however, up to ten devices can be connected.

What are common devices that use IEEE 1394?

Because of its fast and reliable transfer rate, IEEE 1394 is frequently used in professional video editing and real-time video transmissions. It is also commonly used to connect electronic appliances in automobiles, such as DVD players, stereo sound systems, and GPS (global positioning system) navigators.

Is IEEE 1394 obsolete?

FireWire was phased out of Mac hardware between 2008 (when the MacBook Air released without a FireWire port) and 2012 (when the last FireWire-equipped Macs came out).

Can I connect FireWire to USB C?

Most likely, this futuristic computer will operate through Thunderbolt 3, which can be found on most current Mac computers. It was then possible to connect Firewire 400 devices to a Firewire 800 port. As long as you use good quality cables, you can use USB-C cables as Thunderbolt 3.

Is FireWire 800 a 9-pin?

9-pin connectors are part of a recent improvement to the IEEE-1394 technology, called FireWire 800 (or IEEE-1394b). The improvement to the specification allows transfer of data at up to twice the speed of the original IEEE-1394 standard. This type of connector is commonly found on Apple® computers.

Is there a FireWire to USB 3.0 adapter?

The quick answer was there is no such a thing: Once again, there are NO, NONE FireWire to USB adapters. Such adapters ADAPT the connection ends NOT the actual data transfer protocol! However we know FW800 is faster than USB2.

Can you go from FireWire to USB?

No, it is not possible to connect a FireWire interface to your computer’s USB port via a FireWire to USB adapter since this connection is not sufficient to run a FireWire audio interface.

How many devices can be on one IEEE 1394 channel?

The maximum number of devices that can be on one channel (sometimes called a subnet) is 63. This figure includes the host computer, so if you are connecting devices to a IEEE 1394 equipped PC or FireWire equipped Macintosh, then you can connect 62 devices to it.

Is the Universal Serial Bus the same as IEEE 1394?

Another new approach to connecting devices, the Universal Serial Bus ( USB ), provides the same “hot plug” capability as the 1394 standard. It’s a less expensive technology but data transfer is limited to 12 Mbps (million bits per second).

Can a camcorder be connected to IEEE 1394?

IEEE 1394. Because IEEE 1394 is a peer-to-peer interface, one camcorder can dub to another without being plugged into a computer. With a computer equipped with the socket and bus capability, any device (for example, a video camera) can be plugged in while the computer is running.

Why is IEEE 1394 a peer to peer interface?

Because IEEE 1394 is a peer-to-peer interface, one camcorder can dub to another without being plugged into a computer. With a computer equipped with the socket and bus capability, any device (for example, a video camera) can be plugged in while the computer is running.