How do you take the key switch off a S10?
Remove the lock cylinder screw on the ignition switch using the phillips-head screwdriver. Then unbolt the steering column from the column using the 3/8-inch ratchet and socket. Remove the retainer switches that hold the ignition switch to the column using your hands, then remove the switch from the truck.
How do you remove a GM ignition lock cylinder without the key?
Take your screwdriver and insert it into the ignition lock cylinder. Turn it as far round in a clockwise direction that you can. Then pull the paperclip to the right as much as you can. You should then be able to slide the switch out easily.
Why won’t my key turn in the ignition?
Common reasons the ignition key won’t turn include attempting to use a key for a different vehicle, or a locked steering wheel. You can unlock the steering wheel by turning the steering wheel from side to side while simultaneously turning the ignition key on.
How do you change ignition lock on S-10?
Insert the ignition key into the new lock cylinder. Position the key in the “Run” position. Align the cylinder with the mounting area on the steering column and slide the lock cylinder into place, until it clicks. Turn the ignition key to the “Off” position and remove the key from the cylinder. Replace the upper and lower steering column covers.
Can a Chevy S10 ignition cylinder be replaced?
by Tara Kimball. The ignition lock cylinder is the controlling unit of your Chevrolet S10’s ignition system; it controls the ignition and the truck’s accessories. Over time, the cylinder can wear and eventually fail. Replace the cylinder before it fails, making sure to avoid damage to the steering column when you remove the cylinder.
How do you change the ignition lock on a car?
Hold the ignition key in the “Start” position. Insert an awl or similar tool into the hole underneath the lock cylinder. Push the locking tab in with the awl while releasing the key–this allows it to return to the “Run” position. Slide the lock cylinder out of the steering column.
How do you change the lock cylinder on a Honda Accord?
Slide the lock cylinder out of the steering column. Insert the ignition key into the new lock cylinder. Position the key in the “Run” position. Align the cylinder with the mounting area on the steering column and slide the lock cylinder into place, until it clicks. Turn the ignition key to the “Off” position and remove the key from the cylinder.