How do you find the tonnage of a Carrier air conditioner?

How do you find the tonnage of a Carrier air conditioner?

Find the model number. Within this string of letters and numerals, you should find an even, two-digit number. The possibilities on residential units range from 18 to 60. Divide the number by 12 (which represents 12,000 Btu/hr, or one ton of cooling capacity) to get your AC unit’s tonnage.

How do I read my Carrier air handler model number?

For Carrier, you should look for the 7th and 8th digits, or maybe 8th and 9th digits, of the model number. It will be a number divisible by 6 or 12, and represents the nominal BTU of the system in thousands.

How do I know the tonnage of my furnace?

Measure the square footage of every room and hallway in your house. Add your findings to determine your house’s total square footage. Multiple the total square footage by 35 to determine the BTU capacity your furnace needs. Divide the result by 12,000 to figure out the tonnage requirement for the furnace.

How do I know my carrier SEER rating?

The manufacturer typically provides the number, and there are several ways to find it:

1. Look for the yellow and black rating sticker.
2. Look for an information sheet affixed to the front of the air handler, the interior unit.
3. Review the building permit for the cooling system; the SEER rating is normally listed on it.

What is the thumb rule for AC tonnage calculation?

The most basic thumb rule to get started is to calculate the volume of your room in feet and divide it by 1000, this will give you the required capacity in TR (tons). So a 10 foot by 10 foot room which is 10 feet high will need a one ton AC (10’x10’x10′ = 1000 Cu. ft. / 1000 = 1 ton).

How do I read my bard model number?

For Bard, you should look for the first or last two numbers of the model number. They will divisible by 6 or 12, and represent the nominal BTU of the system in thousands.

How many ton AC do I need for 1600 square feet?

4.0 tons
Assuming the minimum cooling capacity of 400 square feet per ton for your HVAC unit, a 1600 square foot home will require 4.0 tons of air conditioning to cool. Your HVAC unit will need to remove about 4.0 x 12,000 BTUs, or 48,000 BTUs, per hour to keep your home cool.

How many CFM is a 3 ton?

1200 CFM
A 3-ton heat pump has approximately 1200 CFM of air flow.

How much more efficient is 16 SEER vs 14 SEER?

How Much More Efficient is a 16 SEER vs 14 SEER? When you divide 16 by 14, the result is that 16 SEER is 1.14 more efficient – The 16 SEER air conditioner is 14% more efficient than a 14 SEER model. If your cooling bill were $500 for the season with a 14 SEER AC, you’d cut it to $430 with a 16 SEER model and save $70.

How to find the tonnage of a carrier AC unit?

Divide the number by 12 (which represents 12,000 Btu/hr, or one ton of cooling capacity) to get your AC unit’s tonnage. If you don’t want to do the math, here are the numbers you’re looking for and their corresponding tonnage: 18 = 1.5 tons.

How big is a ton of air conditioner?

A ton of air conditioning equals 12,000 BTU. Residential air conditioners usually range from 1.5 to 5 tons (or, 18,000 – 60,000 BTUh). Here’s a rundown of the range you will encounter: 18 = 1.5 tons, 24 = 2 tons, 30 – 2.5 tons, 36 = 3 tons, 42 = 3.5 tons, 48 = 4 tons, and 60 = 5 tons.

How are carrier air conditioner model numbers determined?

Each carrier air conditioner is identified by a series of a numbers and/or letters that are designed to easily identifies the characteristic of the units. The one that is interested in are the carrier model number nomenclature. From these multiple-character numbers we can determine the size or tonnage of the system.

How big is a carrier air cooled condensing unit?

Short Description – Carrier®, Commercial Air-Cooled Condensing Unit (Hermetic) – (5.3 to 9.3-tons) Short Description – Carrier®, Commercial Air-Cooled Condensing Unit (Semi-Hermetic) – (6.8 to 35.8-tons)