Menu Close

How do you check the gearbox oil on a Toyota Yaris?

How do you check the gearbox oil on a Toyota Yaris?

How to Check Automatic Transmission Fluids

  1. Pull out the dipstick. Put the car in Neutral or Park with the braking on, and keep the car running.
  2. Check the fluid. The transmission fluid on the dipstick should be bright red and almost clear.
  3. Wipe the dipstick with a clean rag, reinsert it, and pull it out again.

How do you check the gearbox oil on a Ford Fiesta?

How do you check the transmission fluid on a Ford Fiesta?

  1. Pull out the dipstick. With the gearshift in Neutral or Park and the parking brake on, let your engine run.
  2. Check the fluid.
  3. Wipe the dipstick with a clean, lint-free rag; then reinsert it and pull it out again.

How can I check the level of oil in my gearbox?

With the car level, remove the filler/level plug. The oil should be level with the bottom of the plug hole. To remove the plug, reach through the engine bay, or jack up the car, support it level on axle stands at front and rear, and lie underneath the gearbox.

Why does oil have to be poured into a gearbox?

A gearbox contains a great many moving parts. Some of them are submerged in oil and some of them are splashed — that is, the oil is carried to them by other moving parts. The lubrication is designed to prevent metal-to-metal contact, between teeth on gears, for example.

How often should you change your gearbox oil?

‘Extreme pressure ‘ additives in some gearbox oils act as solid lubricants on gear teeth when temperature rises above the safe limit of ordinary oils. The gearbox oil level should not drop noticeably between routine oil changes about every 30,000 miles (50,000 km). If you have to add a lot to correct the level, check carefully for leaks (See).

Where is the oil filler plug on a front wheel drive car?

Layout under a transverse-engined front-wheel-drive car. The filler plug is on the side of the gearbox and indicates the oil level. There are other plugs on the gearbox so identify it correctly before you unscrew it.