Table of Contents
Can you replace the hard drive in directv DVR?
If the drive is functioning, you can get an eSATA drive and connect it to the back which will replace the internal drive quite easily. If it’s totally dead, you’ll have to send that DVR back. Just look for the eSATA port on the back of the DVR and when you find it, you’ll know you’re ok.
What external hard drive is compatible with directv DVR?
While any external hard drive utilizing an eSATA connection can be connected to your DVR, DirecTV recommends the Western Digital 500GB (model WDG1S5000) or 1TB (model WDG1S10000), Seagate 1TB (models ST31000SCA109-RK and STAP1000100) or 500GB (model ST30500SCA109-RK) hard drives.
How do I fix my directv hard drive?
Fixing DIRECTV Genie Hard Drive Failure
- Reboot your receiver by unplugging it from power for about 15 to 30 seconds.
- After that, turn the device back on again and wait for it to reinitialize.
- Then, wait for 10 to 15 minutes while the receiver is on the home screen.
Does DirecTV have a hard drive?
DirecTV/Genie External Hard Drives & Expanders DirecTV HR34, HR44 & HR54 Genie. DirecTV HR20, HR21, HR22, HR23, HR24 & DVRs.
Can I connect an external hard drive to my DVR?
You can connect multiple external hard drives to a single DVR for increased recording storage. Each device will be formatted to that specific DVR when connected. If an external hard drive is disconnected, programs stored on the device won’t be accessible until reconnected to the same DVR.
How do I download my DirecTV DVR to an external hard drive?
Power down the DirecTV HD DVR. Plug the eSATA cable into the eSATA connection port on the rear of the device. Attach the other end of the cable into the eSATA port on your external hard drive. The eSATA cable provides a superior connection method faster than both USB and FireWire.
Can a DVR work without a hard drive?
The system does work without a hard disk drive. You won’t have any video footage for the lack of a hard disk. Therefore, a hard disk drive is highly recommended.
How do I run a diagnostic on my directv box?
You can do that by pressing the power button for at least 10 seconds and then releasing it. Alternatively, you can pull the power plug of the receiver and then wait for at least 10 seconds before inserting the plug back in.
Why does my directv keep saying running receiver self check?
When you restart your client or DVR, you’ll notice that the screen reads “Running receiver self-check.” It looks like this: When you see this, it means that your Genie is automatically running the same test we just taught you how to do manually.