Table of Contents
- 1 What are the objective of drafting?
- 2 What are the types of drafting?
- 3 What was the objective of the drafting committee and who was its chairman class 8?
- 4 How do you write a draft?
- 5 What are the types of drawings used in engineering?
- 6 What are the drafting committee?
- 7 When do you use a straight draft plan?
- 8 What kind of draft is used for heald shafts?
What are the objective of drafting?
The general objectives of drafting as an explanatory practical arts course are as follows: To acquire essential skills in freehand drawing and lettering, in creating simple structural and decorative designs, in sketching pictorial drawings, and in making orthographic working sketches.
What are the types of drafting?
The major kinds of drafting are furniture drafting, architectural drafting, and mechanical or machine drafting, electrical and electronics drafting, topographical drafting, airplane drafting, ship or naval drafting, structural drafting and sheet-metal drafting.
What are the objectives in engineering drawing?
Typically, the purpose of an engineering drawing is to clearly and accurately capture all geometric features of a product or component so that a manufacturer or engineer can produce the required item.
What was the objective of the drafting committee and who was its chairman class 8?
On 29 August, 1947, the Constituent Assembly set up a Drafting Committee under the Chairmanship of Dr. B.R. Ambedkar to prepare a Draft Constitution for India. While deliberating upon the draft Constitution, the Assembly moved, discussed and disposed of as many as 2,473 amendments out of a total of 7,635 tabled.
How do you write a draft?
8 steps to writing your first draft
- Outline your core topic.
- Identify your audience.
- Plan with pre-writing.
- Make a mess and clean it up in later.
- Avoid adding minute details.
- Start writing without engaging your inner critic.
- Don’t stop to do more research.
- Seek appropriate feedback.
What is manual drafting?
Manual drafting is the practice of creating drawings by hand. Manual drafting techniques have traditionally enabled the planning and communication of design ideas and construction information. Indeed some find it easier to sketch, in pencil, their drawing on paper then produce it on CAD.
What are the types of drawings used in engineering?
- Introduction. One of the best ways to communicate one’s ideas is through some form of picture or drawing.
- Isometric Drawing. The representation of the object in figure 2 is called an isometric drawing.
- Orthographic or Multiview Drawing.
- Sectioning.
- Drawing Tools.
- “Assembly” Drawings.
- Cross-Sectional Views.
- Half-Sections.
What are the drafting committee?
The drafting committee, chaired by B. R. Ambedkar, presented a detailed draft constitution which was published for public discussion. The draft constitution was discussed, and amendments proposed and enacted.
What are the different types of drafting plans?
The various drafts are classified as follows: Straight draft. Skip draft. Satin draft. Pointed draft. Broken draft. Divided draft. Grouped draft. Combined draft. Curved draft
When do you use a straight draft plan?
This draft is largely used for satin weaves. This draft avoid friction in very densely set warps. In this draft system a straight draft is reversed after half the repeat warp way. This draft is used when the repeat size is too large. The number of heald shafts is equal to half the number of warp yarn in a repeat size of the weave.
What kind of draft is used for heald shafts?
A suitable type of draft is chosen for each group. This drafts is used for producing check and stripe fabric. Two sets of stripes are used in two sets of heald shafts.
How is the repeat of a draft determined?
Two sets of stripes are used in two sets of heald shafts. The repeat of the draft is determined by the number of stripes and the number of threads in each stripe. The number of shafts in the draft depends upon the number of stripes and the warp repeat of weave of each stripe.