Table of Contents
- 1 Where should the gear selector be when starting a vehicle?
- 2 When starting a vehicle with an automatic transmission the gear selector should be in park or neutral?
- 3 How should you enter a vehicle from the street side?
- 4 When starting a vehicle the gear should be in?
- 5 What is the best way to control consequences if you Cannot avoid a collision?
- 6 When you double the vehicle’s weight you will?
Where should the gear selector be when starting a vehicle?
When starting the engine of a vehicle equipped with a manual transmission, the gear shift lever should be in the neutral position and the clutch pedal should be pressed down completely.
When starting a vehicle with an automatic transmission the gear selector should be in park or neutral?
For a vehicle that has an automatic transmission, you must put the shift selector in “park.” On some vehicles, the brake pedal must also be depressed. Accelerate gradually and smoothly. Trying to start too fast can cause the drive wheels to spin, and will cause your vehicle to slide.
When stopping the car and expecting to continue again shortly the selector lever should be in?
drive
When stopping the car and expecting to continue again shortly,, the shift ever should be in drive.
How should you enter a vehicle from the street side?
When entering a vehicle from the street side, :
- check for traffic to the right.
- approach from the front of the vehicle.
- hold the door open to protect yourself.
- approach from the back of the vehicle.
When starting a vehicle the gear should be in?
You should always start off in 1st gear, especially if you are going uphill. If you don’t, you could damage the car.
What steps should you follow when stopping from higher gears?
- Press the clutch pedal to the floor.
- Move the gear-shift lever to first.
- Depress the foot brake and release the parking brake.
- Hold the clutch momentarily at the friction point until the vehicle starts to move.
- Continue gradual acceleration and let the clutch up all the way.
What is the best way to control consequences if you Cannot avoid a collision?
The best way to control consequences If you cannot avoid a collision is to: Control, brake, steer to collide at an angle with an object.
When you double the vehicle’s weight you will?
For example, if weight is doubled, stopping power must be doubled to stop in the same distance. If speed is doubled, stopping power must be increased four times to stop in the same distance.
What procedure do you follow when leaving the vehicle?
What procedure do you follow when leaving a vehicle?
- Be sure the parking brake is set.
- Press the clutch pedal to the floor with your left foot.
- Put the gear-shift lever in neutral.
- Turn on ignition switch and check warning lights.
- Turn the key forward until the engine starts, then release it.