Table of Contents
How many yards of dirt does it take to fill a pool?
For example if our pool is 30′ long, 20′ wide’ and 6′ deep, it has a total volume of 3,600 square feet (30x20x6). The total square footage divided by 27 is 133.33, this indicates that your pool will need 133.33 cubic yards of material to fill it in.
How much dirt does it take to fill a 30000 gallon pool?
If a swimming pool can hold 30,000 US gallons of water – is it possible to calculate the number of yards of dirt it would take to fill the hole? 30,000 gallons = 6,930,000/46,656 = 148.5 cubic yards. The easy way to make this calculation is to have Google do it for you.
Can you fill in an inground pool with dirt?
Backfilling a pool is the process of filling the empty space left by the inground pool with gravel, sand, or dirt. Backfilling is just one part of the pool removal process. The concrete floor and walls of the pool must be broken up and/or removed prior to backfilling.
How much fill Do I need to fill a hole?
Calculate the volume of dirt needed to fill in the hole using pi (3.142) times the square of the radius times the depth. For this example, you would multiply 3.142 by the square of 30 by 30 to obtain the volume. This yields 3.142 times 900 inches times 30 inches, or 84,834 cubic inches.
How expensive is it to fill in a pool?
How much will it cost? The average cost to remove an inground pool ranges from $3,500 to $15,000 for a medium size pool with relatively easy access. Costs can rise to well over $10,000 for a large pool with a large deck and difficult pool access.
How much does fill cost?
Cost of Fill Dirt, Sand & Topsoil Delivery
| Material | Cost Per Cubic Yard |
|---|---|
| Fill Dirt | $5 – $25 |
| Screened Loam | $18 – $26 |
| Sand | $15 – $50 |
| Compost | $20 – $50 |
How do you calculate fill dirt for a pool?
Before picking up your first shovelful of dirt, determine the cubic volume of your pool by measuring the length, width, and depth of the pool in feet, then multiplying each of them by 27, which is the amount of cubic feet in a yard. This is the total cubic yardage of your pool and the amount of fill dirt you will need to finish the job.
How much topsoil do you need to fill a swimming pool?
The total square footage divided by 27 is 133.33, this indicates that your pool will need 133.33 cubic yards of material to fill it in. Swimming pools are fairly deep, and require large amounts of material to fill. That is why you want to purchase a low cost fill, topsoil will be needed, but only for the surface layer.
How much does it cost to fill in an above ground pool?
Homeowners may also choose to pack the space with concrete. It costs about $100 per cubic foot, so if you have a medium-sized pool (15 feet by 30 feet), you could be charged $500-$800 just for the fill. On the upside, it sets a more solid foundation for whatever you do with the land above it, since it won’t lower over time the way dirt can.
How do you calculate the yardage of a pool?
Measure the length, width, and depth of your pool in feet. Multiply each of these numbers, and divide them by 27 (amount of cubic feet in a yard), the number you come up with is the total yardage of your pool.