Table of Contents
What is the wheelbase of a Chevy S10?
The standard wheelbase measurement for Chevy S10 models is 9 feet long. Some S10s have extended beds with a wheelbase measurement of 9.83 feet or 10.25 feet. The wheelbase is the distance from the center of the front wheels to the center of the rear wheels. The overall length of the S10 ranges from 188 to 204 inches.
What is the wheelbase on a short bed S10?
108.3
Second generation (1994)
| Second generation | |
|---|---|
| Wheelbase | 108.3 in (2,751 mm) (reg. cab short bed) 117.9 in (2,995 mm) (reg. cab long bed) 122.9 in (3,122 mm) (ext. cab short bed) |
| Length | 190 in (4,826 mm) (short bed) 203 in (5,156 mm) (ext. cab) 205 in (5,207 mm) (long bed) |
| Width | 67.9 in (1,725 mm) |
| Height | 63.5 in (1,613 mm) |
What is the wheelbase of a S10 long bed?
The short bed wheelbase on a chevy s10 is 108.30 Inches. Long wheel base models have a bed that is 117.90 Inches.
What Chevy trucks have a 115 wheelbase?
The C10 featured a 115-inch wheelbase for the pickup equipped with the 6.5-foot bed and a 127-inch wheelbase for models with the 8-foot bed. Chevy sold pickups as a chassis and cab that required buyers to custom-fit their choice of beds.
How wide is an S10 frame?
The chevy s10 frame dimenisons are overall length is 205.30 Inches. Its width is 67.90 Inches, and the height is 63.40 Inches.
What is the width of an s10 frame?
How wide is an s10 cab?
The regular cab version of the S-10 has two doors and is available with either a short or long bed. Its cab size is about 70.8 inches. The short bed’s wheelbase is 108.30 inches, while the long bed has a wheelbase of 117.90 inches. Its overall height is 61.30 inches, while its width comes at 64.10 inches.
What is a Chevy C 10?
The C10 model was used by Chevrolet in the years 1960-1987 to define the 2WD drivetrain and ½ ton chassis of every truck they produced. The “C” marking the truck as 2-wheel drive, and the “10” marking it as a half-ton. Chevy C10, or Chevrolet 2wd, ½ ton pickup.
Why is it called C10?
The “C” in C10 indicates that the truck is a two-wheel drive model. The Chevrolet C/K series consisted of two-wheel drive trucks, labeled with a “C”, and four-wheel drive trucks, designated by the letter “K.” The C10 was the half-ton, two-wheel-drive model within the C/K line of trucks.
How much does a S10 frame weight?
how much does the s10 frame weight? its going under a 1900lbs chassis.
What are the wheelbases of the S-10?
“The S-10 comes in three wheelbase lengths. 108″ Shortbed, 117″ Longbed, 122″ Extended Cab.” “Look at the joint between the trans mount and the carrier bearing mount. This joint can be ground out, pulled apart, and the frame extended or shortened. If all you could find was an Ext Cab 122″ WB, here is where you would shorten it.”
How tall is the bed on a S-10?
Its cab size is about 70.8 inches. The short bed’s wheelbase is 108.30 inches, while the long bed has a wheelbase of 117.90 inches. Its overall height is 61.30 inches, while its width comes at 64.10 inches.
How big is the frame on an S-10?
With all the options available, the S-10’s frame dimensions varied, fitting a wide variety of consumer preferences. The regular cab version of the S-10 has two doors and is available with either a short or long bed. Its cab size is about 70.8 inches.
Are there any S-10 based frame swaps?
Any car S-10-based frame swaps? Most use the 117.9″ wheelbase S10 which is a standard cab, long bed. I did a 49′ Chevy Fleetline onto a shortend S10 frame.