Table of Contents
- 1 How much horsepower does it take to run a hay baler?
- 2 What years did New Holland make a 315 baler?
- 3 How much horsepower do you need to run a 4×5 round baler?
- 4 How much does a New Holland 590 baler weight?
- 5 Is a New Holland 310 a good baler?
- 6 How much does a new hay baler cost?
- 7 How much horsepower does a round hay baler need?
- 8 How often should a New Holland Super hayliner be lubricated?
How much horsepower does it take to run a hay baler?
Most standard square balers on the market require 35 horsepower at your tractor’s PTO, and a minimum tractor weight of around 3000 pounds. That means that they cannot be run with today’s compact tractors.
How many HP does it take to run a 3×3 baler?
Key Specs
| Bale | 80×90 cm 3×3 ft |
|---|---|
| Machine – Width | 2.76 m 9.1 ft |
| Machine – Height | 2.7 m 8.9 ft |
| Machine – Weight | 7,700 kg 16,975 lb |
| Minimum tractor requirement | 86 kW 115 PTO hp – no Pre-Cutter 97 kW 130 PTO hp – with Pre-Cutter |
What years did New Holland make a 315 baler?
Just need to remember that the 315 was manufactured between 1976 – 1982, so it is at least thirty years old. Depending on how it was operated and maintained, it can be a dependable baler with years of service left in it – or a money pit that will cause you to pull your hair out.
How much is a square baler?
A good, serviceable square baler can be found from $500 to $2,500 depending on where your small farm is located and what time of year it is purchased. The baler compresses the hay into a packed bale weighing around 38 or 40 pounds, easily manageable by a lone farmer.
How much horsepower do you need to run a 4×5 round baler?
Requiring a minimum of only 40 PTO horsepower to operate, Roll-Belt 450 Utility balers are the perfect match for most tractors found on small farms.
How much is an acre of hay worth?
He says it costs about $297 per acre to seed and prepare hay ground. “You are going to get more than three years out of that, but if we use three years, that’s about $100 per acre per year,” Brown says. “If you are getting $125 per ton for quality hay, you are going to see a profit of $51 per ton, or $204 per acre.
How much does a New Holland 590 baler weight?
Dimensions
| Overall Height | 8.3 ft (3 m) |
|---|---|
| Overall Length | 14.7 ft (4 m) |
| Overall Width | 9.3 ft (3 m) |
| Tractor PTO Power Required | 70 hp (52 kw) |
| Weight | 5524.8 lbs (2,506 kg) |
Is a New Holland 315 a good baler?
The 311 and 315 are both good balers. JD 336/337 also good reliable machines.
Is a New Holland 310 a good baler?
Overall functional performance of the New Holland 310 baler was very good. Average feedrates varied from 2 to 8 t/h (2.2 to 8.8 ton/h). The New Holland 310 was capable of producing firm, well formed bales. Length of the 356 x 457 mm (14 x 18 in) bales could be adjusted from 305 to 1320 mm (12 to 52 in).
How much does a brand new baler cost?
A mainstream high-production baler can cost between $100,000 and $750,000 or more depending on options. Ferrous balers can cost between $180,000 to $1 million.
How much does a new hay baler cost?
For harvesting 4-foot-by-5-foot round bales, estimated new equipment costs are $25,000 for a rotary mower/conditioner, $5,500 for a 10-foot rake, $35,000 for the baler and $55,000 for an adequate-sized tractor.
How much HP does it take to run a 4×4 baler?
The smallest 4×4 balers can run on 40ish hp but are much faster with 65 hp or better.
How much horsepower does a round hay baler need?
PTO horsepower requirements for round balers start at 30 hp and can run up to 120 hp. Bale Size: There are a couple of different options when it comes to bale size in balers.
What are dimensions of New Holland hayliner 68?
Below are the general dimensions for the New Holland Super Hayliner 68 Baler. You can find the manual here .
How often should a New Holland Super hayliner be lubricated?
The New Holland Super Hayliner 69 Baler is designed to require a minimum of lubrication. However, regular lubrication is the best insurance against delays and repairs, and greatly increases the life of the machine. Under normal conditions the baler should be lubricated after every 1,000
What are the features of a tractor baler?
Features: Balers can come with as many or as few of features as new automobiles. A bale monitor that goes inside the tractor cab can be very handy in managing bale options, such as bale size and number of wraps. A bale kicker can also be beneficial in that it can save time.