Table of Contents
Does a 1973 Corvette have power steering?
3-Range Turbo Hydra-matic transmission can be ordered with all engines. Power Steering. With fast steering ratio for quick response.
How do I know if my power steering control valve is bad?
The following are symptoms of a bad or failing power steering control valve.
- Leaking power steering fluid. One of the most common problems with the valve is it will start leaking.
- Difficulty steering. Is it hard to turn a corner or difficult to park?
- Whining noise while turning the wheel.
Where is the power steering control valve located?
Once your left front tire has been removed, you should see the power steering control valve. It’s usually attached to the center pitman arm, right above the steering box.
Does a power steering pump have a pressure relief valve?
Power steering pumps have a built in spring-loaded pressure relief valve. This valve is designed to lower or stop hydraulic pump pressure when pressure reaches a preset value. Within the steering pump a valve will plunge and spring back without the driver’s awareness while turning.
What did a new Corvette cost in 1973?
1973 Corvette Overview
| Model: | 1973 Corvette |
|---|---|
| Transmission: | 4-speed manual (standard), 4-speed manual (optional), 3-speed Turbo Hydra-Matic automatic (optional) |
| Original Price: | $5,561.50 (Coupe), $5,398.50 (Convertible) |
| Units Produced: | 30,464 |
| Specs | 1973 Corvette Spec List |
What is a 1973 Corvette worth?
Prices increased slightly to $5,561.50 for the base coupe and $5,398.50 for the convertible.
How do I know if my electric power steering pump is bad?
The symptoms of a bad steering pump include:
- Your Car Makes a Whining Noise Any Time You Turn the Wheel.
- Your Car’s Steering Wheel Is Slow to Respond.
- Your Car’s Steering Wheel Is Stiff.
- Your Car Makes Squealing Noises When You Turn the Key in the Ignition.
- Your Car Makes Groaning Noises.
How do I know if my rack and pinion or power steering pump is bad?
Symptoms of a bad or failing power steering pump
- Whining noise while turning the wheel. If you hear a whining noise while turning the wheel of your vehicle, something is wrong with your power steering system.
- Steering wheel slow to respond.
- Stiff steering wheel.
- Squealing noises when the vehicle starts.
- Groaning noises.
How do you replace a power steering control valve?
To remove, rotate the power steering control valve clockwise. Once this has been completed, the power steering control valve should easily come off. Step 12: Install the new control valve. Once the old valve has been removed, installing the new control valve is simply done in reverse of the installation.
How to adjust power steering cylinder in corvette?
Install valve in vehicle. Connect all hoses and fill the pump reservoir with oil. Do not connect the piston rod to the frame bracket. If the car already has a valve on it and you are just trying to balance it, remove the piston rod from the frame bracket and proceed. To get to the valve adjusting nut, remove
What happens when a power steering control valve breaks?
When the power steering control valve breaks, it will display a few common symptoms including a smell of burning power steering fluid, a whining noise while turning, or power steering fluid leaking from under the vehicle.
Why are the control valves on my Corvette worn out?
The hydraulic cylinder shaft seals are subjected to sand, debris, and all of the elements which wear them down and inflict damage. In addition, control valves can wear and, with their multiple fluid connections, leaks are inevitable. Many control valves are replaced due to what appears to be excess play in the ball stud.