Table of Contents
- 1 How do I turn off Homedics alarm?
- 2 How do you set the time on a Homedics projection clock?
- 3 How do I set alarm on Homedics SS 4500?
- 4 How do I change the time on my electrohome clock?
- 5 How do you set the Time on an Electrohome clock?
- 6 How do I turn off my electrohome alarm?
- 7 Is the HoMedics ss-5010 soundspa premier AM / FM clock radio?
- 8 What can I do with a HoMedics alarm clock?
How do I turn off Homedics alarm?
Once the alarm sounds, you can either press the Snooze button (see above for Snooze operation) or turn the alarm off. To turn the alarm off, press the ALARM OFF button (fig. 1) on the top of the unit. This will turn the alarm off and the alarm will not sound again until the next programmed alarm time.
How do you set the time on a Homedics projection clock?
Answer: Press and hold the hour button for 5 seconds. The time will start to flash. While the time is flashing, press the hour button until you reach the correct hour.
How do you use a Homedics alarm clock?
Setting and Using the Alarms
- Press and hold (3 seconds) the desired alarm button (ALARM 1 or ALARM 2) located on the top of the unit to activate the alarm set feature. (
- Press and hold the ALARM button again and the hour will begin flashing.
How do I set alarm on Homedics SS 4500?
Setting and Using the Alarm
- Press the ALARM SET button (Fig 5).
- While the time is flashing press the HOUR button (Fig 5) until you reach the correct hour.
- After 5 seconds the alarm set time will stop flashing and it will be programmed, or you may press the ALARM SET button.
How do I change the time on my electrohome clock?
To change the Date/Time, press and hold the button. The settings will appear in the following order: YEAR > MONTH > DAY > 12/24 H > HOUR > MIN 1. Press the or buttons to toggle through the settings 2.
How do you use an Electrohome clock?
With the radio off, press and hold the button until the time zone numbers flash. Press or until your own time zone appears on the display; press ONCE to confirm your selection. 1. Press the or buttons to decrease/increase the HOUR; press the or button to confirm HOUR.
How do you set the Time on an Electrohome clock?
How do I turn off my electrohome alarm?
To enable/disable an alarm, press and hold the or button. An icon will appear on screen to indicate that an alarm is enabled. To change the Date/Time, press and hold the button.
How do you change the Time on a Magnasonic clock?
Is the HoMedics ss-5010 soundspa premier AM / FM clock radio?
Nothing looked as nice and offered as many functions as this Homedics model SS-5010. Right out of the box, I thought the clock was nicely designed and the placement of the buttons made sense.
What can I do with a HoMedics alarm clock?
To summarize, the clock offers up a nice display panel screen to show you time, inside and outside temperature, dual alarm clock settings, and what sound you will hear when the alarm goes off.
Is the HoMedics clock projected on the ceiling?
With the new Homedics clock it projects on the ceiling in a very tight area above my bed that forces me to bend my neck awkwardly to see it. Moreover, one would think with brightness of the display that the projection on the ceiling would be bright too but this is definitely not the case.