Table of Contents
How do I scan channels on Apex TV?
How to perform a channel scan on an Apex Converter Box
- Press the MENU button on the remote control to view the On-Screen Menu.
- Use the arrow keys to navigate to select Channel.
- Press Auto Scan then press OK to begin the scan.
- When finished scanning, the total number of channels found will be shown and updated.
How do you use a digital converter box?
Hooking Up a Digital Converter Box:
- Unplug Your TV. Turn off your television and unplug your TV before you begin.
- Connect Your Antenna.
- Choose Your Connector Type.
- Connect the Box to the TV.
- Plug In Your TV and Converter Box.
- Tune Your TV to the Right Channel or Input.
- Search for Channels.
How do I connect my converter box to my TV?
Using the coaxial wire that comes with your Converter Box, plug one end into the “Out To TV (RF)” port on the Converter Box. Plug the other end into the “Antenna In (RF)” port on your TV. Plug the power cords on your Converter Box and TV into a power outlet, and turn on your TV and Converter Box.
How can I rescan without a remote?
If you don’t have a remote, your TV should have a built-in “Menu” button. Find and select the “Channel Scan” option in your TV’s menu. This option is sometimes labeled “Rescan,” “Tune,” or “Auto-tune.”
How do you rescan your TV?
To start, on your TV remote, select “Menu” and then “Settings.” Next, select “Channel Setup” and select “Antenna” or “Air,” depending on your TV. Make sure you are not on “Cable.” Select “Channel Search” or “Channel Scan.” Keep in mind that steps to perform a channel scan may vary.
What is Apex Digital TV?
Apex Digital, Inc. is an American electronics manufacturer based in Walnut, California founded in 1997. It manufactures and distributes high definition and LCD panel televisions, DVD recorders and players, and other digital items including photo frames and bookshelf audio systems.
Do you need an antenna with a converter box?
Does a converter box need an antenna? Yes. You are going to need a broadcast TV antenna to use a converter box. There are many indoor antennas that you can choose from, but first, you need to make sure you can get a signal where you live.
Where to place a digital converter box on a TV?
Place your digital converter box next to the TV. Your digital converter box will need to be close enough to the TV that it can still connect to the TV without having to stretch or bend any wires. The digital converter box’s front (i.e., the side with the lights and no cord) should be facing in the same direction as your TV.
Where does the DTV converter box need to be?
Your digital converter box will need to be close enough to the TV that it can still connect to the TV without having to stretch or bend any wires. The digital converter box’s front (i.e., the side with the lights and no cord) should be facing in the same direction as your TV.
Where do I plug in my RCA converter box?
RCA cables – Plug the red, white, and yellow cables into the same-colored ports on the back of the digital converter box (e.g., the red cable plugs into the red port and so on), then plug the other ends of the cables into the same-colored ports on the front or back of your TV.