Menu Close

Which button is the valet button?

Which button is the valet button?

Enable Valet Mode It is a small, black, momentary button that is usually mounted in an accessible, but not obvious location towards the bottom of the driver’s side dash. A common location would be on the driver’s kick panel cover, or on the side of the center console (if the vehicle has one).

How do I get my Ford out of valet mode?

Insert your vehicle’s key into the ignition and fully start the engine. Press and release the foot brake pedal 10 times within 10 seconds. If you see/hear two parking light flashes/clicks, you have exited valet mode. Remove the key from the ignition and attempt to remote start your vehicle.

What is valet button on remote starter?

Valet mode is a setting/feature your remote starter has, that allows you to disable the ability to remote start the vehicle. It is designed to be used when you take your vehicle in for service or if you are lending the vehicle out and wish to prohibit (ie turn off) the ability to remote start the vehicle.

What is valet mode on a Ford?

It’s called Valet Mode, and it uses a temporary passcode that permits a valet attendant to unlock, start and drive your vehicle using a SecuriCode™ invisible keypad and the SYNC® 3 touchscreen.

How do you get a Prostart out of valet mode?

Press the and buttons simultaneously until the siren chirps twice, pauses, then chirps twice again. 2. The LED on the antenna will switch OFF indicating that the vehicle is now out of Valet mode.

Why is my automatic start not working?

Double check your engine coolant and oil temperatures: If the engine coolant temperature is too high or the oil pressure is too low, remote start is disabled! After you have let the car cool down for 5-10 minutes and rechecked the levels, retry the start procedure.

How do you turn off the valet button?

1. Enter the vehicle & insert then turn the ignition key to the ON position. 2. On systems from the late 1990s and newer, using trial and error, press & hold the valet button 1-5 times for a second each time. On systems from the mid 1990s and earlier, turn the valet toggle switch to the off position.

Which is the override button on a valet switch?

In those cases the button is the valet button (also known as override button or programming button.) Also, it’s good to know that on the toggle switch style valet switches, the position which has a small notch in the metal is the OFF position. Why do you need a valet mode?

How often do you press the valet button?

On systems from the late 1990s and newer, using trial and error, press & hold the valet button 1-5 times for a second each time. On systems from the mid 1990s and earlier, turn the valet toggle switch to the off position. On both scenarios the system will now remain in valet mode. 3. To return to normal operation, repeat steps 1-2.

Why does my alarm not have a valet button?

Sometimes when an alarm shop installs an aftermarket system with a valet/bypass switch they don’t mount the switch or they don’t hook it up completely. What you need to do is look for the keyless entry receiver (brain).