Where is the computer module on a 2000 Ford Explorer?

Where is the computer module on a 2000 Ford Explorer?

The RKE system module is located in the jack compartment. Open the jack compartment door and look toward the passenger door and you should see a sticker there with the code.

How do I reprogRam my Ford keypad?

How do I Program my Keyless Entry Keypad?

1. On the keypad, enter the 5-digit, factory-set code that came with your vehicle.
2. Within five seconds, press the 1-2 button on the keypad.
3. Enter your desired, new 5-digit code.
4. Press the 1-2 button on the keypad to save your new personal code.

What is the factory set code for Ford Explorer?

The obvious answer is to check Your owner’s manual. It will be in the wallet card, left in the glove boxBy the manufacturer. It is called the “factory default code” on the card. If You don’t have access to the manual, the code can be found on the Remote Anti-Theft Module, also referred to as the RAP.

Where is the factory door code on a Ford Explorer?

Using a flashlight, locate the removable panel and turn two thumb screws counterclockwise to remove the plastic panel. Shine the flashlight onto the RAP module and look for the label containing the 5 digit factory code.

What is the factory-set code for Ford Explorer?

How do I get the factory door code for my Ford Explorer?

Where is the computer module on a 2001 Ford Explorer?

On my 2001, the computer module is located behind the passenger airbag. Lower the glove box completely down and that will give you access to to either 7 or 8 mm bolts. Remove the bolts and the airbag will slide right out.

Where is the 5 digit keyless code on a Ford Explorer?

To find the 5-digit default keyless code on a Ford Explorer or Mercury Mountaineer, start by locating the panel that’s covering the remote anti-theft personality (RAP) module, which should be located toward the back left of your vehicle.

What is the SecuriCode on a Ford Explorer?

Many Ford Explorers and Mercury Mountaineers were manufactured with an option known as the Ford keyless entry keypad. Some models refer to it as SecuriCode as well. It is a five-button numeric keypad that is used to: The keyless entry uses a five-digit code to unlock the doors when it is entered correctly.

Can you change the factory code on a Ford Explorer?

Whether you’re the sole owner or have a pre owned car, the Ford Explorer or Mercury Mountaineer will come with a factory code and owner’s manual. It is recommended that a new owner change the original five-digit factory code. Hopefully, you have kept the factory code in a safe place.

Where is the rap module on a Ford Explorer?

There are two possible locations for the RAP module. Step 1: Find your tire change compartment. On most 1999 to 2005 Explorers and Mountaineers, you can find the RAP module in the compartment where the tire change jack is located. Step 2: Locate the cover for the jack.